# 4.3  Installing/Storing Command Sticks

Model: lite-640t · Manual v1.0.2
Canonical: https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks
Source: https://drive.google.com/file/d/1yQTDKasKxbvfVdANOx9bmlPYml-2dkCE/view
Updated: 2026-10-17

EVO Lite 640T Enterprise · SE V2 controller

The RC features removable command sticks, which effectively reduce storage space and enable easy carrying and transportation.

[PDF page 70, block 13](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p70-b13)

## Installing command sticks

[PDF page 70, block 14](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p70-b14)

Take out the command sticks from the command stick storage slots. Then rotate them clockwise to install them separately on the remote controller.

[PDF page 70, block 15](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p70-b15)

## Storing Command sticks

[PDF page 71, block 2](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b2)

Rotate counterclockwise to remove the two command sticks and then store them in the command stick storage slots as shown below.

[PDF page 71, block 3](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b3)

Storing command sticks

![Storing command sticks](https://shop.skyflow.ca/manuals/evo-lite-640t-v1-0-2/1225f87b2a7729a325112105.webp)

[PDF page 71, block 4](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b4)

## Tips

[PDF page 71, block 6](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b6)

When the command sticks are not in use (such as during transportation and temporary aircraft standby), we recommend that you remove and store them in the storage slots. This can prevent you from accidentally touching the command sticks, causing damage to the sticks or unintended startup of the aircraft.

[PDF page 71, block 7](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b7)

When storing the sticks, please make sure that they are fully stored in the slots.

[PDF page 71, block 8](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-3-installing-storing-command-sticks#p71-b8)