# 4.6  Charging the Remote Controller

Model: lite-640t · Manual v1.0.2
Canonical: https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller
Source: https://drive.google.com/file/d/1yQTDKasKxbvfVdANOx9bmlPYml-2dkCE/view
Updated: 2026-10-17

EVO Lite 640T Enterprise · SE V2 controller

Connect the USB-A output end of the official RC charger to the USB-C interface of the remote controller by using a USB-A to USB-C cable and connect the plug of the charger to an AC power supply (100-240 V~ 50/60 Hz).

[PDF page 73, block 8](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p73-b8)

Use the RC charger to charge the remote controller

![Use the RC charger to charge the remote controller](https://shop.skyflow.ca/manuals/evo-lite-640t-v1-0-2/fe2e0128a4485d78ef501b73.webp)

[PDF page 74, block 2](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b2)

<ul><li>Please use the official charger provided by Autel Robotics to charge the remote controller. Using third-party chargers may damage the battery of the remote controller.</li><li>After charging is complete, please disconnect the remote controller from the charging device promptly.</li></ul>

![Manufacturer note](https://shop.skyflow.ca/manuals/evo-lite-640t-v1-0-2/d22b879d0ff6b36a0306d8c0.webp)

[PDF page 74, block 4](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b4)

## Remarks

[PDF page 74, block 5](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b5)

It is recommended to fully charge the remote controller battery before the aircraft takes off.

[PDF page 74, block 6](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b6)

Generally, it takes about 90 minutes to fully charge the aircraft battery, but the charging time is related to the remaining battery level.

[PDF page 74, block 7](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b7)

## Tips

[PDF page 74, block 8](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b8)

If the remote controller is not used for a long time, please charge it every 3 months to prevent long-term low power from affecting battery life or damaging the battery.

[PDF page 74, block 9](https://shop.skyflow.ca/learn/autel/evo-lite-enterprise/manuals/evo-lite-640t-v1-0-2/4-6-charging-the-remote-controller#p74-b9)