Glass curtain walls
Controlled passes across larger glazed elevations. Use the water quality and rinse process required for the finish.
SkyFlow
HoverWash 3 FC
Smart washing wand for DJI FlyCart 100.
Controlled sweep for facade washing, supplied with a 200 ft light high-pressure hose in 6 mm.
CAD $10,300 MSRP
Wand + 200 ft hose. Aircraft and pump sold separately.
Sweep or hold.
Work across a broad surface, then hold the nozzle direction for a more deliberate pass.
- Head movement
- 30° left and right in the documented wand design.
- Fixed-point mode
- A steady cleaning direction for edges and facade details.
- Assembly
- Modular construction with quick-release connections.
The supplied manufacturer sheet documents the FlyCart 30 wand architecture. SkyFlow confirms the FC100 mount, controls and delivered configuration with your order.
Motion illustration · not an operating control
6 mm for the FC100.
The included hose is 200 ft (60.96 m) long. It has a larger bore than the 4 mm HoverWash 3 hose; a water-filled line also adds more suspended weight.
A matched 1/4-inch hose is another FC100 option. Its fittings and pressure rating need to be checked separately.
View the existing 4 mm hoseMatch the hose to the aircraft.
FlyCart 100
6 mm supplied · matched 1/4-inch optional
Start with the 200 ft kit; size any extra length to the installation.Matrice 400
One 6 mm line or two 4 mm sections
SkyFlow planning guidance, subject to suspended load and mounting review.Hoses can be configured for either platform when fittings, pump output and pressure ratings match. Hose length does not equal usable washing height.
Where it fits.
Cladding & facade details
Sweep open areas; use fixed direction around edges and features. Test the cleaning pressure on the surface first.
Long commercial elevations
Pair the 6 mm feed with a suitable ground pump and hose route. Check the heaviest suspended section of the line.
The 200 ft kit.
Two core components.
CAD $10,300 MSRP.
SkyFlow HoverWash 3 FC
1 × smart washing wand
HoverWash 3 FC 200 ft Light High-Pressure Hose — 6 mm
1 × hose · existing HoverWash hose photo shown
Aircraft connection & separate equipment
Aircraft, controller, batteries, pump, water tank, detergent, generator and optional tethered power are separate. The order schedule confirms the mount, adapters and controls.
DJI specifies an additional FC100 PSDK Connection Cable Combo for third-party external payloads. Confirm the required cable in your order. DJI FC100 specifications
Start with your aircraft.
Three ways to build
a washing setup.
 H150HoverWash 150 |  Matrice 400HoverWash 3 |  FlyCart 100SkyFlow HoverWash 3 FC |
|---|---|---|
| Best fit A dedicated washing operation Repeated cleaning of large facades, cladding and accessible commercial surfaces. | Best fit An existing M400 fleet Glass, facade details and mixed inspection / cleaning work. | Best fit A larger hose configuration Broad commercial elevations where a 6 mm or matched 1/4-inch feed suits the pump. |
| Hose plan 328 ft standard hose | Hose plan One 6 mm line or two 4 mm sections, subject to load review | Hose plan 200 ft × 6 mm included; matched 1/4-inch option |
| Choose it when Choose a purpose-built washing aircraft when cleaning is the core business. Explore H150 | Choose it when Use the aircraft you already operate. Choose HW3 Lite for simpler rod hardware. Explore Matrice 400 | Choose it when Choose FC100 when the installation calls for a heavier water-filled hose. Explore FlyCart 100 |
M400 hose counts are SkyFlow configuration guidance. DJI specifies a 6 kg maximum payload under defined conditions; the mount, wand and suspended hose share that allowance. M400 specifications
Have a pump or aircraft already?
Send the model, working height and site photos. We’ll help match the hose, fittings and ground supply.