HoverWash field footageFlight batteries
Move between elevations and work areas with a familiar aircraft setup. Plan each sortie, battery change and charging cycle into the job.
Flexible staging · standard power workflow
HoverWash 3 Lite
Carbon Fiber Drone Cleaning Rod · Lance for Matrice 400
View all kits & current pricingSimple. Cheap.
Reliable.
A lightweight carbon fiber rod. A nozzle kit. A straightforward way into drone cleaning.
SF-3 Lite starts at CAD $2,230. Choose the rod on its own, or pair it with the hose that fits your work.
Compare the three kits
Keep the hardware simple.
SF-3 Lite is the entry-level option in the SF-3 family: a light carbon fiber cleaning rod that keeps the focus on the essentials.
Bring a compatible pressure-washing setup, choose your hose and match the nozzle to the surface. It is a practical option for crews that want to control the cleaning pass themselves.
Three ways to get to work.
Rod + Nozzle Kit
A simple start with your existing compatible hose and pump.
CAD $2,230
200 ft High Flow Rate Kit
Prioritize flow and efficient washing at lower working heights.
CAD $2,930
400 ft High Rise Kit
Prioritize reach with the smaller-diameter hose configuration.
CAD $3,530
Select your kit on the purchase page. Aircraft and pump are sold separately.
More flow. Lower-altitude efficiency.
200 ft High Flow Rate Kit
Use the 1/4-inch hose when you value flow and washing efficiency at lower working heights. Optimized for gas pumps and compatible with most existing pressure-washing rigs after matching pressure ratings, fittings and nozzle requirements.
- Hose
- 1/4 inch · 200 ft
- Configuration flow target
- 8–9 GPM
- Configuration pressure range
- 2,000–5,500 PSI
Challenge the height.
The 400 ft High Rise Kit uses a smaller 1/8-inch hose for jobs where reach is the priority. Best matched to a suitable electric pump, with a target washing height of up to 400 ft when the complete setup supports it.
- Hose
- 1/8 inch · 400 ft
- Configuration flow target
- 3–4 GPM
- Configuration pressure range
- 2,000–3,000 PSI
Hose lengths and performance figures are configuration targets. Delivered flow and pressure depend on pump output, hose losses, nozzle selection, fittings and elevation; the maximum flow and pressure values are not a guaranteed simultaneous nozzle output. Usable washing height also depends on hose routing, aircraft payload, weather and the approved operating plan.
A simple SkyClean alternative.
Shopping for a drone power washing system or comparing SkyClean from Infinit Drones? SF-3 Lite puts the carbon fiber cleaning rod first, with an accessible entry price and two clear hose choices.
SkyClean is a Nested Technologies product sold by Infinit Drones. When comparing quotes, check the lance, nozzles, hose length, pump and aircraft included in each package. SF-3 Lite pricing covers the named rod or hose kit; the drone and pump are separate.
SkyFlow is independent of Infinit Drones and Nested Technologies.
Ready for more efficient cleaning?
Choose SF-3 / HoverWash 3 when you want controller-operated nozzle switching, repeatable ±30° sweep and pilot-supervised cleaning workflows. Its additional control is designed to improve coverage and reduce manual repositioning.
Lite keeps the starting cost down. SF-3 adds control for the next stage of your cleaning operation.
Explore SF-3 / HoverWash 3Before your first wash.
Does the price include a drone or pump?
No. Every option includes the rod and nozzle kit. Hose kits include their named supply hose. Aircraft, batteries, controller, pump and water supply are separate.
Which hose should I choose?
Choose the 200 ft, 1/4-inch High Flow Rate Kit for lower working heights and gas-pump setups. Choose the 400 ft, 1/8-inch High Rise Kit when reach is the priority and you have a suitable electric pump.
Can I use my existing pressure washer?
Many existing rigs can be matched to the High Flow Rate Kit. Share your pump model, rated output, fittings and target working height with SkyFlow so the complete configuration can be checked.
Does SF-3 Lite include smart sweep or PSDK controls?
SF-3 Lite is the simple rod option. For controller-operated nozzle switching, sweep and supported mission workflows, choose SF-3 / HoverWash 3.
Which aircraft does it fit?
The supplied installation photos show DJI Matrice 400. Confirm the mounting configuration and payload allowance for your aircraft with SkyFlow; compatibility with other aircraft is not established here.
Two ways to power a wash.
Use the Matrice 400 flight batteries for mobile work. For a planned operating area, ask SkyFlow to review an optional CZI TK4 ground power system. Both configurations still need a separate wash-water hose.
HoverWash field footage
CZI TK4 tethered flight footageOptional TK4 tether
A ground station supplies aircraft power through a cable. The TK4 has 110 m and 200 m options for Matrice 400, subject to a complete build and site review.
Defined work zone · managed power cable
The CZI footage shows a TK4-powered aircraft; the HoverWash footage shows the washing workflow. They do not depict a validated combined TK4 + HoverWash flight. Confirm payload, connectors, site power, wind and routing of both the power tether and wash hose before ordering a combined build.
Complete specifications.
SF-3 Lite rod
- Construction
- Lightweight carbon fiber rod
- Base package
- Rod + nozzle kit · CAD $2,230
- Operation
- Simple cleaning rod; smart sweep and PSDK controls are SF-3 / HoverWash 3 features
- Aircraft fit
- Matrice 400 shown in installation images; confirm mounting configuration before purchase
200 ft High Flow Rate Kit
- Price
- CAD $2,930
- Hose
- 1/4 inch · 200 ft (60.96 m)
- Flow target
- 8–9 gallons per minute (GPM)
- Pressure range
- 2,000–5,500 PSI
- Pump pairing
- Optimized for gas pumps; most existing rigs subject to compatibility checks
- Best fit
- Lower-altitude washing where flow and efficiency are the priority
400 ft High Rise Kit
- Price
- CAD $3,530
- Hose
- 1/8 inch · 400 ft (121.92 m)
- Flow target
- 3–4 gallons per minute (GPM)
- Pressure range
- 2,000–3,000 PSI
- Pump pairing
- Best paired with a suitable electric pump
- Height target
- Up to 400 ft, configuration and site dependent
Configuration notes
- Performance basis
- Hose lengths and performance figures are configuration targets. Delivered flow and pressure depend on pump output, hose losses, nozzle selection, fittings and elevation; the maximum flow and pressure values are not a guaranteed simultaneous nozzle output. Usable washing height also depends on hose routing, aircraft payload, weather and the approved operating plan.
- Sold separately
- Aircraft, batteries, remote controller, pump and water supply
- Rod-only supply hose
- Not included; use a compatible existing hose
What’s in the box.
SF-3 Lite Carbon Fiber Rod
Lightweight drone cleaning rod assembly.
Nozzle Kit
Included with all three configurations.
200 ft · 1/4-inch Hose
Included with the 200 ft High Flow Rate Kit only. Representative hose image.
400 ft · 1/8-inch Hose
Included with the 400 ft High Rise Kit only. Representative hose image.
Detailed product notes.
Simple. Cheap. Reliable.
SF-3 Lite is a straightforward carbon fiber drone cleaning rod with a nozzle kit. Lightweight hardware, a lower entry price and your choice of hose make it the accessible starting point in the SF-3 family. Start at CAD $2,230 when you already have a compatible hose and pump.
200 ft High Flow Rate Kit — CAD $2,930
Choose the 1/4-inch, 200 ft hose when lower-altitude cleaning and flow matter most. The specified configuration targets 8–9 GPM and 2,000–5,500 PSI. Optimized for gas pumps and integration with most existing pressure-washing rigs, subject to pump, fitting and nozzle compatibility. Includes the rod, nozzle kit and 200 ft hose.
400 ft High Rise Kit — CAD $3,530
Challenge the height with the 1/8-inch, 400 ft hose configuration. The specified configuration targets 3–4 GPM and 2,000–3,000 PSI and is best paired with a suitable electric pump. Designed around a washing-height target of up to 400 ft, subject to the complete system and site setup. Includes the rod, nozzle kit and 400 ft hose.
Comparing SkyClean alternatives in Canada?
If you are researching SkyClean by Nested Technologies, sold by Infinit Drones, compare the equipment you actually need. SF-3 Lite offers a simple carbon fiber drone washing lance from CAD $2,230, with separately priced high-flow and high-rise hose kits. Compare the included rod, nozzle kit, hose, pump and aircraft—not just the package name. SkyFlow and SF-3 Lite are not affiliated with Infinit Drones or Nested Technologies.
Want to increase cleaning efficiency? Choose SF-3.
Step up to SF-3 / HoverWash 3 for controller-operated nozzle switching, a repeatable ±30° sweep and pilot-supervised cleaning workflows. Choose Lite for simple hardware and a lower entry cost; choose SF-3 when more control and fewer manual repositioning steps matter to your crew.
What's included and how to match your setup
Every option includes the SF-3 Lite rod and nozzle kit. The two hose kits add their named hose; the rod-only option excludes the long supply hose. Aircraft, batteries, remote controller, pump and water supply are sold separately. The supplied imagery shows a Matrice 400 installation; confirm the mount and complete aircraft/pump configuration with SkyFlow before ordering. Hose lengths and performance figures are configuration targets. Delivered flow and pressure depend on pump output, hose losses, nozzle selection, fittings and elevation; the maximum flow and pressure values are not a guaranteed simultaneous nozzle output. Usable washing height also depends on hose routing, aircraft payload, weather and the approved operating plan.
Choose your Lite configuration.
View kits & pricingEmail
Phone
Location
Richmond Hill, Ontario, Canada