Skip to the answer
EVO Lite Enterprise / procedure

How do I update EVO Lite Enterprise aircraft and controller components?

Source-reviewed 2026-10-17 · Manual edition 1.0.2

Applies toEVO Lite 6K Enterprise and EVO Lite 640T Enterprise aircraft with the SE V2 remote controller; Premium Kit controller instructions are excluded.

Firmware scope: not specified in this answer. English manufacturer manual; Canadian flight permission and applicable local rules are not determined by this source.

Autel’s manual says the flight app can manage updates for multiple UAS components. The documented Update All procedure updates the aircraft and remote controller; make sure they are already paired, both batteries are above 25%, and the controller has internet access.[1]
Before you begin

Before updating the controller, confirm its battery is inserted and has sufficient power. Do not remove that battery or shake the controller during its update. Do not power off the aircraft; keep it connected to the controller, and do not move the command sticks before or after the update so the propellers remain stationary. The controller may disconnect after updating; if so, the manual directs you to its separate pairing procedure.[1][2]

The manual says online updates require an internet connection at the remote controller. It also directs operators to insert a microSD card and ensure the aircraft and controller have enough storage for update packages.[1][2]

Follow these steps

  1. Prepare the aircraft and controller

    Power on the aircraft and remote controller, confirm they are paired, and ensure each has more than 25% battery. Connect the controller to the internet, insert a microSD card in the aircraft, and check that both devices have enough storage.[1][2]

  2. Run the app update

    Open the flight app. Use the update notification or open the app settings to check for an available version, then tap Update All. The app downloads and updates firmware for the aircraft and remote controller.[1]

  3. Restart as prompted

    When the update completes, follow the app prompts to restart the aircraft and remote controller. The manual says the update typically takes about 15 minutes, depending on the controller’s network.[1]

Sources & review

  1. 1. EN_EVO Lite Enterprise Series Aircraft User Manual_V1.0.2.pdf
    7.1 UAS Components Updates · physical PDF page 141 (printed 130) · blocks 3, 4, 6, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
    Manual & edition details · View original source ↗
    Original PDF visually checked 2026-10-17. Drive access may be required.
    Evidence identitysha256:775f2386515122d0ddeee8c4f9509b4e48ef4074e145b008ae9c9b76258fba01/extraction-page:141/blocks:3,4,6,9,10,11,12,13,14,15,16,17,18,19

Reviewed by Codex · source review. Source-reviewed against the cited original PDF pages and prepared MinerU blocks. This AI-assisted review is not manufacturer, human technician or field-test approval. Updated 2026-10-17.

Location
Richmond Hill, Ontario, Canada