How do I link an EVO II RTK V3 aircraft to its remote controller?

Applies to

EVO II Pro RTK V3 EVO II Dual 640T RTK V3

EVO II Pro RTK V3 and EVO II Dual 640T RTK V3. The manual says a whole aircraft/controller package is linked before delivery; this procedure is for other cases when manual linking is needed.

Firmware scope: not specified in this answer. English manufacturer manual; Canadian operational permissions and applicable local rules are not determined by this source.

Autel’s RTK Series V3 manual names both the Pro RTK V3 and Dual 640T RTK V3 configurations. A whole package that includes an aircraft and remote controller is already linked before delivery. If manual linking is needed, use the aircraft linking button and Autel Explorer app procedure below.[1][2][3]

Before you begin

Autel says bundled aircraft/controller packages are linked before delivery. Use the manual linking procedure when the controller is not already linked or needs to be linked again.[3]

Follow these steps

Put the aircraft into linking state
Press the linking button beside the USB port on the right side of the aircraft body.[3]
Start linking in Autel Explorer
Turn on the remote controller and open Autel Explorer. From the mission flight page, open Settings > Remote Controller > Data Transmission and Image Transmission Linking > Start Linking. Wait several seconds for linking to complete.[3]

Sources & review

1. EVO II RTK V3 User Manual-EN.pdf
2.1.4 Gimbal and Camera · Pro RTK V3 · physical PDF page 19 (printed 19) · blocks 0, 2
Manual & edition details · View original source ↗
Original PDF visually checked 2026-10-17. Drive access may be required.
Evidence identity
sha256:86c3293d59a84bf258d4cc60819bd4d901dfb93b63bec853e23a0fd878838f09/extraction-page:19/blocks:0,2
2. EVO II RTK V3 User Manual-EN.pdf
Dual 640T RTK V3 gimbal designation and important note · physical PDF page 20 (printed 20) · blocks 0, 9, 10, 11
Manual & edition details · View original source ↗
Original PDF visually checked 2026-10-17. Drive access may be required.
Evidence identity
sha256:86c3293d59a84bf258d4cc60819bd4d901dfb93b63bec853e23a0fd878838f09/extraction-page:20/blocks:0,9,10,11
3. EVO II RTK V3 User Manual-EN.pdf
5. Linking · physical PDF page 36 (printed 36) · blocks 0, 1, 2, 3, 4
Manual & edition details · View original source ↗
Original PDF visually checked 2026-10-17. Drive access may be required.
Evidence identity
sha256:86c3293d59a84bf258d4cc60819bd4d901dfb93b63bec853e23a0fd878838f09/extraction-page:36/blocks:0,1,2,3,4

Reviewed by Codex · source review. Source-reviewed against the cited original PDF pages and prepared MinerU blocks. This AI-assisted review is not manufacturer, human technician or field-test approval. Updated 2026-10-17.

Follow these steps

Put the aircraft into linking state

Start linking in Autel Explorer

Sources & review