Pre-flight checks, aircraft control and flight-safety procedures.
The Standard flight manual describes pairing when factory pairing is absent or lost, plus the kit’s normal factory-paired state.
Autel’s Pro V3 pre-flight checklist covers the aircraft, controller, mobile device, surroundings, firmware, weather and sensors.
Pairing guidance for the EVO II Pro RTK V3 and Dual 640T RTK V3 configurations named by Autel’s RTK Series V3 manual.
Calibrate only when the flight app requests it; follow the on-screen compass steps and Autel’s interference precautions.
Autel says the gimbal is calibrated at manufacture; run the app procedure only when it prompts for motor calibration.
The app-prompted calibration sequence, stationary-surface requirement and completion guidance for EVO Lite Enterprise.
See how EVO Lite 6K and 640T Enterprise handle low-battery return-to-home alerts, the 10-second prompt and critically low battery landing.
A source-based pre-flight checklist for EVO Lite 6K and 640T Enterprise, covering the battery, airframe, camera, controller, setup and app alerts.
What the EVO Lite Enterprise manual says about RTH obstacle response, the conditions it depends on and its limits.
How manual, low-battery and configured flight behavior can trigger RTH, with the manual’s key limits for EVO Lite 6K and 640T Enterprise.
A source-based workflow to build a waypoint route, set mission behaviour and reach the app’s pre-flight check.