What should I check before flying an EVO Lite Enterprise aircraft?

Follow these steps

1. Secure the aircraft and battery

   Confirm the aircraft and remote controller have sufficient battery power. Check that the aircraft battery is installed securely and its lock button is in the locked position.[1]

2. Inspect arms, propellers and motors

   Check that propellers are installed securely and are not damaged or deformed. Make sure the motors and propellers are clean, the arms and propellers are fully extended, and no foreign objects are present.[1]

3. Check cameras, gimbal and covers

   Clear dirt, fingerprints or obstructions from the visual cameras, gimbal camera and supplementary lights. Remove the gimbal cover and confirm normal three-axis movement. Insert the microSD card and close the rubber covers over the card slot and USB-C port.[1]

4. Set up the controller and launch area

   Secure and extend the remote-controller antennas. Place the aircraft outdoors on an open, level area clear of obstacles; stand at least 5 metres behind it.[1]

5. Power on and review the app

   Confirm the aircraft connects to the controller and that the motors and gimbal camera function properly. Apply aircraft and controller updates when prompted, address app warnings or errors, and review flight-control, obstacle-avoidance, joystick and other flight-safety settings. Keep appropriate distance from other aircraft operating at the same time.[1]