Charging, battery specifications and charging faults.
Autel Alpha manual v1.1 identifies the Smart Controller V3 and explains its USB-C charging connection and precautions.
Learn when Dock 4 swaps the Matrice 5TD battery, how to request a full charge, and the landing-pad and cover cautions.
Dragonfish Pro flight manual v1.1.1 shows the official charger connection and battery conditions that must be observed.
Instructions for the remote controller used with EVO II Pro Enterprise V3 and Dual 640T Enterprise V3; rugged bundles are outside this scope.
The aircraft manual specifies the MDXM_6175_1113 battery: Li-Po 3S, rated capacity 6,175 mAh, energy 68.7 Wh and nominal voltage 11.13 V. The charging tempera
Use the official Autel charger, connect its charging interface to the battery’s metal-electrode notch, then connect it to a 100–240 V AC, 50/60 Hz supply. Dis
See how EVO Lite 6K and 640T Enterprise handle low-battery return-to-home alerts, the 10-second prompt and critically low battery landing.
Temperature protection can stop charging below 5°C or above 45°C. After a flight, a battery hotter than 45°C must cool below 40°C before it can charge. These
Connect the EVO Lite Enterprise SE V2 controller to its official Autel charger using USB-A to USB-C, then follow the manual’s charging precautions.
Charge the EVO Max Smart Controller V3 with the official Autel charger and a USB-C cable, following the v1.2.5 manual’s power and safety guidance.