Search the manuals.
Find instructions, diagrams, specifications and answers. Search the full EVO Lite 640T manual, or filter by aircraft.
87 results
- Full manual section · EVO Lite 640T · v1.0.2
4.6 Charging the Remote Controller →
Connect the USB-A output end of the official RC charger to the USB-C interface of the remote controller by using a USB-A to USB-C cable and connect the plug of the charger to an AC power supply (100-240 V~ 50/60 Hz). Use the RC charger to charge the remote controller <ul><li>Please use the official …
- Full manual section · EVO Lite 640T · v1.0.2
4.7 Adjusting the Antenna Position of the Remote Controller →
During flight, please extend the antenna of the remote controller and adjust it to an appropriate position. The strength of the signal received by the antenna varies depending on its position. When the angle between the antenna and the back of the remote controller is 1 8 0 ^ { \circ } or 2 7 0 ^…
- Full manual section · EVO Lite 640T · v1.0.2
4.8 Remote Controller System Interfaces →
4.8.1 Remote Controller Main Interface After the remote controller is turned on, it enters the main interface of the flight application by default. In the main interface of the flight application, slide down from the top of the touch screen or slide up from the bottom of the touch screen to display…
- Full manual section · EVO Lite 640T · v1.0.2
4.9 Frequency Matching With the Remote Controller →
4.9.1 Using the Flight Application Only after the remote controller and the aircraft are paired can you operate the aircraft using the remote controller. The procedures are as follows: 1. Turn on the remote controller and the aircraft. 4.9 Frequency Matching With the Remote Controller — original i…
- Full manual section · EVO Lite 640T · v1.0.2
5.1 Battery Introduction →
The aircraft comes standard with the MDXM_6175_1113 smart battery (hereafter referred to as smart battery) as the power battery. This battery is a rechargeable lithium-ion polymer (LiPo) battery and features high energy density and capacity. The smart battery can be charged with an MaxAd_3SA battery…
- Full manual section · EVO Lite 640T · v1.0.2
5.2 Smart Battery Functions →
The smart battery has the following functions: Battery Level Display The smart battery has a built-in battery level indicator, which shows the current battery level of the smart battery. Communication The aircraft can obtain real-time battery information, such as voltage, current, battery level, and…
- Full manual section · EVO Lite 640T · v1.0.2
5.3 Smart Battery Usage →
Please use a smart battery within the appropriate temperature range (-10℃ ~ +40℃). Using it in too high or low temperatures will affect the battery’s safety and lifespan and may cause spontaneous battery combustion or permanent damage to the battery. Do not use the aircraft in a strong electrostatic…
- Full manual section · EVO Lite 640T · v1.0.2
5.4 Storing and Transporting the Smart Battery →
When storing the smart battery, keep the battery away from water or heat sources and store it in a dry, well-ventilated environment at room temperature. Ideal storage conditions: The battery level is at around 60%, the ambient temperature is between 22°C to 28°C, and the ambient humidity is 65%±20% …
- Full manual section · EVO Lite 640T · v1.0.2
5.5 Maintaining and Handling the Smart Battery →
5.5.1 Maintaining the smart battery In order to maintain the activity of the smart battery of the aircraft, it is recommended to perform battery maintenance if any of the following conditions are met: It is recommended to perform battery maintenance for the smart battery every 50 times of battery c…
- Full manual section · EVO Lite 640T · v1.0.2
6.1 Software Introduction →
Autel Enterprise is a flight application developed by Autel Robotics for enterprise applications. The application supports waypoint mission, rectangle mission, polygon mission and oblique mission, integrates a variety of professional functions to quickly get started and improve efficiency; through a…
- Full manual section · EVO Lite 640T · v1.0.2
6.10 Pre-flight Check →
Before the aircraft starts to execute a mission, a pre-flight check is required. On the "Pre-flight Check" interface, you can preview the current status (such as battery level, battery temperature, and SD card memory) and route data of the aircraft and perform some settings such as flight parameters…
- Full manual section · EVO Lite 640T · v1.0.2
6.11 Resume Mission →
When an abnormal situation such as an abnormal exit occurs during a flight mission, tap the illustrated icon to enter the "Mission" interface. This will trigger the “Resume Mission” function, and a prompt window “Detect a paused mission. Would you like to resume 让 ? will pop up. Resume Mission Opt…
- Full manual section · EVO Lite 640T · v1.0.2
6.12 Mission and Favorites →
On the "Mission/Favorites" interface, you can query, edit, favorite, and delete previously saved flight missions. Mission/Favorites Interface Query Tap the u Q u icon in the upper-right corner of the “Mission” interface and enter the desired content to quickly locate the corresponding historical f…
- Full manual section · EVO Lite 640T · v1.0.2
6.2 Main Interface →
After turning on the remote controller, you will automatically enter the main interface. Main Interface of the Flight Application (EVO Lite 640T Enterprise Aircraft) <table><tr><td>No.</td><td>Name</td><td>Description</td></tr><tr><td>1</td><td>Status Notification Bar</td><td>Displays the flight mod…
- Full manual section · EVO Lite 640T · v1.0.2
6.3 Status Notification Bar →
<table><tr><td>No.</td><td>Icon</td><td>Meaning</td><td>Description</td></tr><tr><td>1</td><td>The compass is abn...</td><td>Status and Fault Warning</td><td>Displays the current warning information of the aircraft:➤ Gray indicates that the remote controller is not connected to the aircraft.➤ Orange…
- Full manual section · EVO Lite 640T · v1.0.2
6.4 Toolbar →
The toolbar is displayed at the bottom of the system status notification bar of the flight application, which allows you to quickly activate certain functions. In the toolbar, you can long press and drag the function icons to customize the sorting. At the same time, you can also tap on the illustrat…
- Full manual section · EVO Lite 640T · v1.0.2
6.5 “Settings” Interface →
6.5 “Settings” Interface — original illustrated control path In the "Settings" interface, you can set parameters such as flight control, obstacle avoidance, remote controller, image transmission, battery, and gimbal. 6.5.1 Flight Control Parameter Setting In the sidebar of the “Settings” interface…
- Full manual section · EVO Lite 640T · v1.0.2
6.6 Attitude Ball →
The attitude ball is mainly used to dynamically display the relative positions of the aircraft, the remote controller, and the home point, and display relevant attitude, flight speed, battery level, operating time, and other flight safety data of the aircraft. Any changes in the aircraft's status wi…
- Full manual section · EVO Lite 640T · v1.0.2
6.7 "Map" Interface →
In dual screen mode, tap the illustrated icon at the corner of the “Map" dual screen; or after entering the "Wide Angle" camera interface or “IR” camera interface, tap the “Map" mini window at the lower left corner to enter the "Map" full-screen interface. "Map" Interface <table><tbody><tr><td>No.</…
- Full manual section · EVO Lite 640T · v1.0.2
6.8 Camera Interfaces →
6.8.1 Camera Function Access Camera Function Area (EVO Lite 640T Enterprise) <table><tr><td>No.</td><td>Icon</td><td>Meaning</td><td>Description</td></tr><tr><td>1</td><td>IR</td><td>Switch to Thermal Camera</td><td>On wide-angle camera interface or map screen split interface, tap this icon to ente…